Graphite Electrode Manufacturers In Sinis HP500 pro Ferro faciens Arcum Electric Fornacis
Technical Parameter
| Parameter | Pars | Unitas | HP 500mm(20") Data |
| Nominal Diameter | Electrode | mm (inch) | 500 |
| Max Diameter | mm | 511 | |
| Min Diameter | mm | 505 | |
| Longitudo nominal | mm | 1800/2400 | |
| Max Longitudo | mm | 1900/2500 | |
| Min Longitudo | mm | 1700/2300 | |
| Current Density | KA/cm2 | 15-24 | |
| Current Capacitas baiulans | A | 300000-48000 | |
| Imprimis resistentia | Electrode | μΩm | 5.2-6.5 |
| Papilla | 3.5-4.5 | ||
| Flexurae Fortitudo | Electrode | Mpa | ≥11.0 |
| Papilla | ≥22.0 | ||
| Modulus | Electrode | Gpa | ≤12.0 |
| Papilla | ≤15.0 | ||
| mole Density | Electrode | g/cm*3 | 1.68-1.72 |
| Papilla | 1.78-1.84 | ||
| CTE | Electrode | 10-6/ | ≤2.0 |
| Papilla | ≤1.8 | ||
| Cinis Content | Electrode | % | ≤0.2 |
| Papilla | ≤0.2 |
NOTE: Quaelibet specifica exigentia in dimensione offerri potest.
Late usus in Industry
- Arcus enim Electric fornax chalybea faciens
- Nam Yellow phosphoro fornace
- Applicare ad fornacem industrialem pii vel aeris liquefactionem.
- Applicare ad Refine ferrum in fornacibus trunci et in aliis processibus excoquendis
Quam eligere Idoneum Graphite Electrode
Cum ad electionem graphite electrode ius venit, plures causae sunt considerandae.
- Uno modo, qualis electrode critica est.Electrode qualitas summus structuram magis aequabilem habebit, id quod minus proclivior est ad fracturam et spallationem.
- Secundo, magnitudo electrodis eligenda est secundum aestimationem potestatis EAF, cum maioribus fornacibus electrodes ampliores requirunt.
- Tertio genus electrode eligendum est secundum gradus ferri, parametri operandi, et consilium fornacis.Exempli gratia, electrodus UHP (Ultra High Power) fornacibus sublimibus potentiae aptior est, cum HP (High Power) electrode fornacibus mediae potentiae aptus est.
Gufan Graphite Electrode Nominal Diameter et Longitudo
| Nominal Diameter | Actualis Diameter | Longitudo nominal | tolerantia | |||
| mm | digitis | Max(mm) | Min(mm) | mm | Inch | mm |
| 75 | 3 | 77 | 74 | 1000 | 40 | +50/-75 |
| 100 | 4 | 102 | 99 | 1200 | 48 | +50/-75 |
| 150 | 6 | 154 | 151 | 1600 | 60 | ±100 |
| 200 | 8 | 204 | 201 | 1600 | 60 | ±100 |
| 225 | 9 | 230 | 226 | 1600/180 | 60/72 | ±100 |
| 250 | 10 | 256 | 252 | 1600/180 | 60/72 | ±100 |
| 300 | 12 | 307 | 303 | 1600/180 | 60/72 | ±100 |
| 350 | 14 | 357 | 353 | 1600/180 | 60/72 | ±100 |
| 400 | 16 | 408 | 404 | 1600/180 | 60/72 | ±100 |
| 450 | 18 | 459 | 455 | 1800/2400 | LXXII/96 | ±100 |
| 500 | 20 | 510 | 506 | 1800/2400 | LXXII/96 | ±100 |
| 550 | 22 | 562 | 556 | 1800/2400 | LXXII/96 | ±100 |
| 600 | 24 | 613 | 607 | 2200/2700 | 88/106 | ±100 |
| 650 | 26 | 663 | 659 | 2200/2700 | 88/106 | ±100 |
| 700 | 28 | 714 | 710 | 2200/2700 | 88/106 | ±100 |
Superficies Quality Ruler
1. Defectus vel foramina non plus quam duae partes in superficie electrode graphite debent, et defectus vel foraminum magnitudinem datas in tabulis infra memoratis excedere non licet.
2. Vox transversa nulla in superficie electrodis est. Nam rima longitudinalis, longitudo non plus quam 5% graphitarum circumferentiae, latitudo intra 0.3-1.0mm range. Vox longitudinalis data infra 0.3mm data debet esse neglegenda
3. Latitudo eius maculae asperae (nigrae) areae in superficie graphite electrodis non minus quam 1/10 graphitae circumferentiae electrodis esse debet, et longitudo maculae asperae (nigrae) areae super 1/3 longitudinis graphite electrodis non licet.
Superficies defectus Data pro Graphite Electrode Chart
| Nominal Diameter | Defectus Data (mm) | ||
| mm | digitis | Diameter(mm) | Profundum (mm) |
| 300-400 | 12-16 | 20-40 | 5-10 |
| 450-700 | 18-24 | 30-50 | 10-15 |
Related Products
-
Electric Arc Furnace Graphite Electrodes HP550m...
Technical Parameter Parameter Pars Unit HP 550mm(22") Data Nominalis Diameter Electrode mm(inch) 550 Max Diameter mm 562 Min Diameter mm 556 Nominal Longitudo mm 1800/2400 Max Longitudo mm 1900/2500 Min Longitudo mm 1700/2300 Densitas Current KA/ cm2 14-22 Current Capacitas Capacitas A 34000-53000 Imprimis resistentia Electrode μΩm 5.2-6.5 Papilla 3.2-4.3 Flexurale S...
-
Graphite Electrodes Cum Papillis Manufacturers ...
M ( 12") Data Nominal Diameter Electrode mm (inch) 300(12) Max Diameter mm 307 Min Diameter mm 302 Nominalis Longitudo mm 1600/1800 Max Longitudo mm 1700/1900 Min Longitudo mm 1500/1700 Current Densitas KA/cm2 17-24 Current Capacitas A 13000-17500 Imprimis resistentia Electrodis μΩm 5.2-6.5 Papilla 3.5-4.5 Flexu...
-
Graphite Electrodes In Electrolysis HP 450mm 18...
Technical Parameter Parameter Part Unitas HP 450mm(18") Data Nominal Diameter Electrode mm(inch) 450 Max Diameter mm 460 Min Diameter mm 454 Nominal Longitudo mm 1800/2400 Max Longitudo mm 1900/2500 Min Longitudo mm 1700/2300 Densitas Current KA/ cm2 15-24 Current Capacity A 25000-40000 Imprimis resistentia Electrodis μΩm 5.2-6.5 Papilla 3.5-4.5 Flexurale S...
-
HP24 Graphite Carbon Electrodes Dia 600mm Elec...
Technical Parameter Parameter Part Unitas HP 600mm(24") Data Nominalis Diameter Electrode mm (inch) 600 Max Diameter mm 613 Min Diameter mm 607 Nominal Longitudo mm 2200/2700 Max Longitudo mm 2300/2800 Min Longitudo mm 2100/2600 Current Density KA/ cm2 13-21 Current Capacitas A 38000-58000 Imprimis resistentia Electrodis μΩm 5.2-6.5 Papilla 3.2-4.3 Flexurale S...
-
Graphite Electrodes For Steel Faciens High Power...
Technical Parameter Parameter Part Unitas HP 400mm(16") Data Nominalis Diameter Electrode mm(inch) 400 Max Diameter mm 409 Min Diameter mm 403 Nominal Longitudo mm 1600/1800 Max Longitudo mm 1700/1900 Min Longitudo mm 1500/1700 Densitas Current KA/ cm2 16-24 Current Capacity A 21000-31000 Imprimis resistentia Electrodis μΩm 5.2-6.5 Papilla 3.5-4.5 Flexurale S...
-
High Power Graphite Electrode For EAF LF Smelti...
M ( 14") Max Diameter Electrode mm (inch) 350(14) Max Diameter mm 358 Min Diameter mm 352 Nominal Longitudo mm 1600/1800 Max Longitudo mm 1700/1900 Min Longitudo mm 1500/1700 Current Densitas KA/cm2 17-24 Current Capacitas A 17400-24000 Imprimis resistentia Electrodis μΩm 5.2-6.5 Papilla 3.5-4.5 Flexur...
